Handling After Forming:
Deposited Randomly in Bins/Baskets
Stacked/Nested
Wrapped/Boxed
No Part-on-Part Contact
Directly to Paint, Assembly or Cleaning
Treated with a Rust Preventative
Stored for
Open Condition
Other

Type(s) of Metal(s):
Steel
Stainless
Cast Iron
Aluminum
Brass
Zinc
Magnesium
Other

General Description of Part(s):

Machining:

Grinding:

Method(s) of Filtration:

Water Source:
Municipal
DM
DI
Filtered

Tramp Oil Removed:
YesNo

Central System(s):
YesNo

Size(s):

Individual Sumps:
YesNo

Size(s):

Handling After Processing:
Deposited Randomly in Bins/Baskets
Stacked/Nested
Wrapped/Boxed
No Part–on–Part Contact
Directly to Paint, Assembly or Cleaning
Treated with a Rust Preventative
Stored for
Open Condition
Other

General Description of Part(s):

Type(s) of Operation(s):
Cleaning
Rust Removal
Deburring
Descaling
Burnishing
Brightening
Polishing
Cutting Down
Other

Type(s) of Vibratory Equipment:
Tub
Bowl
Open Barrel
Closed Barrel
Other

Type(s) of Media:
None
Ceramic
Steel
Plastic
Glass
Other

Water Source:
Municipal
DM
DI
Filtered

Cycle Time:

Rinse:
YesNo

Soils Removed:

Handling After Processing:
Deposited Randomly in Bins/Baskets
Stacked/Nested
Wrapped/Boxed
No Part–on–Part Contact
Directly to Paint or Assembly
Treated with a Rust Preventative
Open Condition
Other

General Description of Part(s):

Type(s) of Operation(s):
Immersion
Spray
Rotary
Manual
Heated
Ambient

Water Source:
Municipal
DM
DI
Filtered

Washer Temperature:

Cycle Time:

Rinse:
YesNo

Tank Capacity:

Number of Wet Stages:

Change-Out Interval:

Drying:
None
Drip
Air Knife
Heated Forced Air
Drying Oven

Soils Removed:

Degrees of Cleanliness:
No Specific Requirement
Visual
Water–Break–Free
Not Oily to Touch

Tests Used to Determine Cleanliness, If Any:

Handling After Cleaning:
Deposited Randomly in Bins/Baskets
Stacked/Nested
Wrapped/Boxed
No Part–on–Part Contact
Directly to Paint or Assembly
Treated with a Rust Preventative
Other

Type(s) of Metal(s)
Carbon Steel
Cast Iron
Other

General Description of Part(s):

Method(s) of Application
Immersion
Spray
Heated
Ambient
Other

Water Source:
Municipal
DM
DI
Filtered

Wet Parts When RP Is Applied:
YesNo

Drying or Draining Time:

Drying Conditions:
None/Parts are Packaged Immediately
Air Dried/Drip Dried
Forced Warm Air

Handling After Treatment:
Deposited Randomly in Bins/Baskets
Stacked/Nested
Wrapped/Boxed
No Part–on–Part Contact
Directly to Paint, Assembly or Cleaning
Other

Storage Conditions:
Inside – Climate Control
Inside – No Climate Control
Outside – Uncovered
Outside – Covered
Exposure to Rain, Mist or Leakage
Open Containers
Covered Containers

Desired Film:
Ultra-Thin/Thin
Med/Heavy
Oily/Greasy
Dry-to-the-Touch
Soft/Waxy

General Description of Operation(s):

Additional Information:

Contact Us

Find My Product

Contact US